Відео

Nothing wrong with old school. That is how I got started so many years ago. Thanks for sharing.

Thanks for helping me set up my WiFi to my Navien.

Very nice video. Definitely going to save this video and download it so that I'll be able to find it easily whenever I do this to my 3472. Just got it today and can already tell it's going to need a rewire down the road.

I'd be curious how the replacement worked out over the long run... How'd it go?

I’m having issues registering the Navilink? Does anyone have any answers for this ?

Allow me to pile on with the accolades and appreciation for this video. I've just installed a Navilink Lite on my 2-year-old NPE-210A2 and am up and running with no issues. Could not have done it without this video, though. I started by downloading all of the documentation from the Navien site and reading every word before even opening the box. What a waste of time that was. Zero useful information in the manuals and spec sheets. Then I searched and found this video. I consider myself a fairly tech-savvy guy and needed to see this app work before I purchase my second Navien water heater for a vacation home in another state where we already have a lower-end tankless system. I really like our existing Navien re-circ system but require remote control. Our vacation home has a well with year-round 54 degree water. Plus the master bath is the furthest point from the heater. So it currently takes 2 minutes and 15 seconds to get hot water to the master bath. We will be hosting short-term rental guests who will not take kindly to the low-end system's performance. So a condensing system with re-circ (like I have at our primary home) with a dedicated return loop line is exactly what I need. But the house will be vacant at least 2/3 of the time, and I can't justify burning propane year round just because I want a re-circ pump. Nor can I trust guests or the cleaning service to manually turn the heater on and off. So this is looking good for our application. I expect to be able to monitor gas and water utilization. But most import for me, I should be able to turn the new system on and off remotely. Thanks again for a great video.

Great video ! Made install and use easy

Thank you so much! This was a very helpful video.

Thank you for posting your design. I'm using your code and most of the hardware for my speedometer. Great video; this one and part 2, it made my project much easier.

So now I have it all enabled. I have noticed that the hot button when pressed barely runs but when you enable a schedule it fully heats up the external loop. I don't know if there is something I am missing setting wise with the hot button mode ...but it goes function.

Also one other comment.....any idea what "Auto" does on the top of the app screen? I enable and disable that and can't tell whay it does on mine

Awesome video very helpful. Is there a second parameter to setup to allow the navilink app to use the hot button?

Just used this to correct a bad install by plumber. Excellent instructions! Especially the granular details Navien omitted. Thanks!

My old hp px 229ax amd 10 has the same problem, since the original fan is busted, change it to oem, that was the problem happened. I've already looked for cooling system with the copper, but can't seem find it, I'm in Indonesia. Since I've already have the replacement laptop, Victus core i7, this old laptop now being used by my daughter. To avoid thermal shutdown when she'is playing roblox for hours, I put a big standing fan in near this laptop, and it works like a charm. Now I got to find out how to set Roblox to amd graphic card, any ideas on how to do that? Thanks

Thank you

Same issue here. 2010 Honda Pilot.

I had one of these Chicago Police Chevy Caprice models.

I'm trying to find the size of bulbs. On changing the bulbs, that outer part come off, makes it really easy to screw the bulb in. But finding the bulb is almost impossible. Thank's

Good detail on the scenery, thanks for sharing.

Did you try print with flexible filament on wox1?

Have people found the NaviLink lite worth the cost for a home owner?

Thanks friend, exactly the same thing happens to me, it is an HP 15 ba079dx that reaches almost 100 degrees, I checked half of the copper tube, it is boiling and the other is not, the fan works perfectly and I put thermal paste on it. It is not the best, but it should fulfill its function and not reach that temperature. With what you say, I will not hesitate to buy a new copper heatsink.

Did you video the beginning of disassembly to where you start this video? I would love to see it first before starting to work on my unit. I don't see how you disconnected and reconnected the wire to the flashbulb. Thanks very much for all you do! These videos are very helpful to keeping my village running! (Sorry if this is a duplicate message. I didn't see my first message post).

I would say use velcro to hold up the fish paper that has the component's on it, that's why I would do.

hello I have a 3dwox1 can you tell me how I can connect it to the latest version of Cura slicer v5.6.0 also I have had no luck finding my printer on my network. I can view the remote camera but the printer doesn't appear on my PC regardless of me using wifi or a plan cable. HELP please.

Only buy mth and weaver and williams and. I have post war lionel I. Don't have any legacy stuff

Very helpful, thanks for sharing. Btw, we'll be switching to this model in a couple of weeks and I'm a network guy so I will confirm where the app connects to, whether locally to a service in the cloud. Thanks again.

Have you ever had the EC 501 #1 Error? I've got my 3DWOX X2 torn apart and can't seem to find the issues other then everytime the nozzle moves it pops up.

Thank you Bob so much for this video. The Navien documentation for the NaviLink Lite is utter garbage and I would not have been able to complete the install of this device without your help. I also greatly appreciate the extra info about the functionality and features of the NaviLink App you included in this video.

Hello dear Sir, Can you we use external fan instead of the broken down that inside? Best regards

Super helpful video. Thanks! Couldn't find any info elsewhere. Your review was perfect.

I watched this video. The installer had connected the navlink light up for me. It was frustrating trying to get i working until i found this video. this video showed me how to enable it in the menu on the NPE-240A2. Worth the price of admission!!. Thank you!!!

I wish I knew this video existed before I installed mine, I am very disappointed there isn't a hot button on my app, which is why I bought the NaviLink Lite. Without that feature, this NaviLink is useless to me. Their advertisement indicates this is one of the features, and there is no disclaimer saying you must purchase anything else.

what a great help.

Thanks a lot, I have the same problem which it shutdown after 15 seconds, it shuts down and exactly it is very hot at the end of copper tube. So basically I should change the copper tube with new one, is that it?

In the video you mentioned the filament guides for the open source. Do you have the stl files to print the guides for the 2X printers?

But that's only a tiny skiff of a snow, and it was piled on the wrong side of the driveway, where the town plows will bring it right back across on their next path. It should have been piled "downstream", where the town plows would have rolled it up on the lawn instead.

Thank you good Sir!

A huge thanks to you for putting this video out. The flash on mine stopped working and, before digging into the guts, I decided to goggle the repair and your video popped up. You saved me tons of time. I just checked the switch by trying it manually (no luck), then crossed the terminals (it worked). I dug out my contact cleaner and sprayed it down. Rechecked it and success! A word of caution to others: When reassembling, make sure to remove the center cap on the bottom so you can pull the wires out (gently) while putting the base and the top back together again. I didn't do that at first, and the wire pushing against the trigger disk caused it to lean down on one side and trigger the flash when it wasn't supposed to. An easy fix, but better to avoid it from the start.

What did you find out about Daylight savings time? Does the Navilink keep the time updated via WiFi or no?

Super helpful! I am surprised that the app does NOT have a hot button function! It’s quite useless because of that.

Great video, thanks for posting this it’s just what I needed to get the NaviLink up and going.

We have been trying for days to get the Sindoh to work with 3rd party filament and it keeps breaking in the middle of the prints. We are not very experienced with the printer (we work at a school and the person who used them left leaving us no support), but we need to print student projects soon. What kind of things can we try to keep this from happening?

NESESITO UNO DE ESTOS CIRCUITOS DONDE SE PUEDE CONSEGUIR CON TIEMPO CRONOMETRO MARCADOR Y NOMBRE DE EQUIPOS XFA Y GRACIAS X LA INFORMACION

XFA EL DIAGRAMA O ESQUEMATICO PARA REALIZAR UNO DE ESTE PROYECTO Y LOS MATERIALES A USAR XFA

XFA EL DIAGRAMA O ESQUEMATICOS EN ESPAÑOL GRACIAS

XFA EL DIAGRAMA O ESQUEMA PARA REALIZAR UNO DE ESTE PROYECTO Y LOS MATERIALES A USAR XFA

That’s awesome

How do you enable in the installer menu ?

Nice video. Had a devil of a time getting the device to connect to my network. I use UniFi networking equipment and I was finally able to trace the issue to a WPA problem. A lot of my devices use the Wi-Fi Protected Access 3 protocol (WPA3) but I have a few older devices that still use WPA2. Unifi network configuration allows for a hybrid/mix of WPA2 and WPA3 support but the NaviLite box does not like this at all - refuses to connect. Disabling WPA3 and using solely WPA2 gets things going which is both good and not so good. Other than that problem, it works well. I dont know if there is any way to show the software version of the wifi box - the only version I see is 10.02 but I think thats my NPE-240S2. The app reports 2.00.02